T6 ATC Engraving Processing Center
The MNT T6 is an engraving processing center that adds an automatic tool changer to MNT’s rigid, stress-relieved router platform. A 4-tool linear ATC and a high-power ATC spindle let it run multi-tool jobs without stopping to change cutters — for engraving, milling and cutting across a wide material range.
- 🚚 45 days lead time
- 🧮 MOQ 1 unit
- 💳 T/T, L/C
- 🛡 12-month warranty
At a Glance
The MNT T6 is an ATC engraving processing center on a welded, stress-relieved bed finish-machined in one setup. A 4-tool linear automatic tool changer and a 9 kW air-cooled (or 7.5/11 kW water-cooled) ATC spindle, run by a Weihong 280 controller, handle multi-tool jobs unattended on a 1300×2500 mm table — cutting wood, acrylic, ACP, stone, nylon, plasterboard, fibreglass and more.
Standard Configuration
The T6 ships in a 1300×2500 mm working area as standard, with a choice of 9 kW air-cooled or 7.5/11 kW water-cooled ATC spindle. Custom sizes are available on request.
T6-1325
1300 × 2500 mm processing center with 4-tool linear ATC and high-power ATC spindle for unattended multi-tool jobs.
Industries We Serve
Sign & Display Fabrication
Multi-tool engraving and cutting in one setup.
Furniture & Cabinetry
Drilling, milling and shaping of panels and parts.
Stone & Solid-Surface
Engraving and cutting of stone and composite surfaces.
Industrial Components
Nylon, fibreglass, plasterboard and engineering materials.
T6 Full Specifications
| Parameter | Specification |
|---|---|
| Working area | 1300 × 2500 mm |
| Spindle | 9 kW air-cooled, or 7.5 / 11 kW water-cooled (ATC) |
| Tool changer | 4-tool linear-type ATC |
| Control system | Weihong 280 industrial controller |
| Bed | Inline welded, quenched & stress-relieved, single-setup gantry-milled |
| Drive motor | Servo (X/Y/Z) |
| Control / software | G-code & PLT — Type3, Mastercam, ArtCAM, AutoCAD, UG, CorelDRAW |
| Materials | Wood, acrylic, ABS, insulating board, bakelite, PVC, ACP, stone, nylon, plasterboard, fibreglass |
| Power supply | AC 380V / 50Hz / 3-phase |
| Net weight | 2000 kg |
Why the T6
An ATC turns a router into a processing center: jobs that need several tools run start-to-finish without an operator swapping cutters.
Automatic Tool Changer
- 4-tool linear-type ATC
- Multi-tool jobs run unattended
- Fast, seamless tool changes
High-Power ATC Spindle
- 9 kW air-cooled, or 7.5/11 kW water-cooled
- Low noise, high speed, constant torque
- Headroom for tougher materials
Rigid, Stress-Relieved Bed
- Welded, heat-treated, single-setup machined
- Holds geometry under heavy cuts
- Built for long service life
Wide Material Range
- Wood, acrylic, ACP and plastics
- Stone, nylon, plasterboard, fibreglass
- Weihong 280 industrial control
Why an ATC Changes What a Router Can Do
Most engraving jobs need more than one tool — a roughing bit, a finishing bit, a drill, a profiling cutter. On a manual router the operator stops the job to swap each one, which costs time and reintroduces positioning error every change. The T6’s 4-tool linear automatic tool changer removes that: the program calls each tool in sequence and the machine swaps it in seconds, so multi-stage jobs run start-to-finish unattended.
That only works if the platform underneath is rigid enough to trust between tool changes. The T6 uses the same welded, quenched and stress-relieved bed finish-machined in a single gantry-mill setup as MNT’s precision routers, so the datum stays constant across every tool call. A high-power ATC spindle — 9 kW air-cooled or up to 11 kW water-cooled — gives the torque headroom to move from light engraving to heavier milling within one program.
Driven by a Weihong 280 industrial controller and servo motors on all axes, the T6 behaves like a small machining center: load the stock, run the program, collect finished parts.
T6 — Frequently Asked Questions
How is the T6 Different from the T5?
The T6 adds a 4-tool linear automatic tool changer and a high-power ATC spindle to the same rigid bed, so multi-tool jobs run unattended. The T5 is a single-spindle precision router.
How Many Tools Does the ATC Hold?
A 4-tool linear-type automatic tool changer is standard.
What Spindle Options Are Available?
A 9 kW air-cooled ATC spindle, or 7.5 / 11 kW water-cooled, depending on your materials.
What Materials Can the T6 Process?
Wood, acrylic, ABS, PVC, ACP and also harder materials such as stone, nylon, plasterboard and fibreglass.
What Power Supply Does It Need?
AC 380V / 50Hz / 3-phase. Other voltages may be available on request.
Get a Tailored Quote for the T6
Tell us your materials, sheet size and daily volume — we’ll recommend the right configuration and send pricing within one business day.